| PART |
Description |
Maker |
| AIM-37 AIM-37-S AIM-37AT-M AIM-37AT-M0ST0 AIM-37AT |
10.1 Industrial Tablet for Retail Application
|
Advantech Co., Ltd.
|
| TC4403CPA TC4403MJA TC4403 TC4403EPA |
1.5A High-Speed, Floating Load Driver
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. The load is intended to be connected between the outputs without other reference to supply or ground. Then,
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| STI7102-BUD |
Cost-effective HD decoder for retail STBs
|
ST Microelectronics
|
| FHM1 153002 153003 |
Intended for use
|
Littelfuse
|
| AN4080 |
This application note is intended for system designers
|
STMicroelectronics
|
| L99MM70XP L99MM70XPTR |
Integrated microprocessor driven device intended for LIN controlled exterior mirrors
|
ST Microelectronics
|
| IW4066B |
A quad bilateral switch intended for the transmission or multiplexing of analog or digital signals
|
Estek Electronics Co. L...
Estek Electronics Co. Ltd
|
| DF10G6M4N |
This product is designed for protection against electrostatic discharge and is not intended for any other purpose, including, but not limited to, voltage regulation.
|
Toshiba Semiconductor
|
| MM-0637A-50 MM-0637A-35 |
The 637A series filter is a very compact DC filter intended for use with telecommunication hardware
|
JMK Inc.
|
| ACD82224 |
Single chip implementation of 24-port 10/100 ethernet switch system intended for IEEE 802.3 and 802.3u compatible networks.
|
Advanced Communication Devices
|
| BLF6G13L-250P BLF6G13LS-250P |
Product description250 W LDMOS power transistor intended for CW applications at a frequency of 1.3 GHz.
Power LDMOS transistor BLF6G13LS-250P<SOT1121B (CDFM4)|<<http://www.nxp.com/packages/SOT1121B.html<1<Always Pb-free,;
|
NXP Semiconductors N.V.
|
